Open in LDS
Christmas Phone Protector Case
How-to
LaserPecker
2023/12/21 21:12 30
Make a Christmas-themed protective case for your phone.
Basic Information
| MachineLP4 |
| MaterialPlastic/Silicone |
| Size150 x 160 mm |
| Production Time10 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a protective case on the base. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
Settings 1
| Engraving MethodPicture |
| MaterialPlastic |
| Resolution2 K |
| Power100% |
| Depth20% |
| Pass1 |
| Module Type2 W 1064 nm |
Step 2
Different colors of phone cases and trying different parameters will also give different results.
Settings 1
| Engraving MethodPicture |
| MaterialPlastic |
| Resolution2 K |
| Power100% |
| Depth25% |
| Pass1 |
| Module Type2 W 1064 nm |
Step 3
The Christmas-themed phone cases is ready, you can give it to your friends.
Settings 1
| Engraving MethodPicture |
| MaterialPlastic |
| Resolution2 K |
| Power100% |
| Depth8% |
| Pass1 |
| Module Type10 W 450 nm |
Step 4 Note
If you use different materials or want different effects, you will need to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
17
Christmas
Phone
