Open in LDS
Christmas Candy Pendants
How-to
LaserPecker
2023/12/21 20:58 7
With Christmas just around the corner, let's use the LX1 to make Christmas tree candy decorations.
Basic Information
| MachineLX1 |
| MaterialPaper |
| Size276 x 170 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time10 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing red and green paper on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
| Engraving MethodLine |
| MaterialPaper |
| Power100% |
| Depth10% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
Use string to tie them together, and add chocolate or candy in the middle. Then you can hang them on the Christmas tree.
Step 3 Note
If you use different materials, you need to adjust the parameters manually.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Christmas Candy Pendants.lp2
Open in LDSDownload
5
Christmas
Christmas Tree
Candy
