Open in LDS
Italian Pasta-shaped Rock Coaster
How-to
LaserPecker
2023/12/21 14:14 4
engrave your favorite graphics for your rock chopping board!
Basic Information
| MachineLP4 |
| MaterialStone |
| Size147 x 234 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time20 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file and connect the LP4 and the LP4 Slide Extension. Place the board on the Slide Extension. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters.. Next, you can start engraving.
Settings 1
| Engraving MethodFill |
| MaterialStone |
| Resolution1 K |
| Power100% |
| Depth10% |
| Pass1 |
| Module Type2 W 1064 nm |
Step 2
A creative wooden rock chopping board is completed.
Step 3 Note
If you're using different materials, remember to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
4b1b897427f847eba22f1ef20d0554f2__%3AItalian%20Pasta-shaped%20Rock%20Coaster-02.lp2
Open in LDSDownload
3
Rock
food
Cutting Board
