Open in LDS
Black Friday Board for Sale
How-to
LaserPecker
2023/12/15 11:59 0
Let's use a carving machine to make a Black Friday board for sale.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size110 x 60 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a basswood plank on the cutting pad. Open the file, connect the LX1， adjust the focus, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
Settings 1
| Engraving MethodLine |
| MaterialBasswood plank |
| Power100% |
| Depth3% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Settings 2
| Engraving MethodFill |
| MaterialBasswood plank |
| Resolution2 K |
| Power65% |
| Depth10% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
In this way, the Black Friday Board for sale is ready.
Step 3
If you're using different materials, remember to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
69e49e8196af43859e07a8b31c579ce2__%3ABlack%20Friday%20Board%20for%20Sale.lp2
Open in LDSDownload
2
Black Friday
