Open in LDS
Halloween Keychain
How-to
LaserPecker
2023/12/15 11:50 8
Make a Halloween keychain
Basic Information
| MachineLP4 |
| MaterialWood |
| Size52 x 17 mm |
| Production Time2 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a wooden keychain on the cutting pad. Open the file, connect the machine，adjust the focus, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
Settings 1
| Engraving MethodFill |
| MaterialCherry wood plank |
| Resolution2 K |
| Power1% |
| Depth5% |
| Pass1 |
| Module Type10 W 450 nm |
Step 2
So you get a Halloween keychain.
Step 3 Note
If you're using different materials, remember to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
bffbef6cfc36440b99d9647034f7fc27__%3AHalloween%20keychain.lp2
Open in LDSDownload
4
Halloween
Keychain
