Wooden Rabbit Decoration
How-to
- Machine
- LX1
- Material
- Wood
- Size
- 153 x 197 mm
- Material Information
- 3mm Basswood plank
- Software Used
- LaserPecker Design Space PC
- Production Time
- 25 min
- Engraving Difficulty
Design Files
2023/12/22 16:5413
Introduction
Let's use a carving machine to make a wooden rabbit decoration.
How-to Tutorial
Step1:
Begin by placing a 3mm basswood plank on the cutting pad. Open the file, connect the LX1, adjust the focus, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
- Engraving Method
- Line
- Material
- Wood
- Power
- 70%
- Depth
- 80%
- Pass
- 1
- Acceleration Level
- 1
- Module Type
- 20 W 450 nm
Step2:
After gluing the wooden blocks together, the wooden rabbit decoration is ready!
Step3: Note
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Birthday Gift
Sharing Good Finds

Comments