Open in LDS
Bat Cork Coaster
How-to
LaserPecker
2023/12/08 20:08 9
Let’s make a bat cork coaster.
Basic Information
| MachineLP4 |
| MaterialWood |
| Size104 x 104 mm |
| Production Time5 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a cork coaster on the base. Adjust the focal length, verify the size.preview the position, and ensure that the preview range covers the entire circular cork coaster.Determine the engraving parameters. Once everything is set, proceed to start engraving.
Settings 1
| Engraving MethodFill |
| MaterialCork coasters |
| Resolution2 K |
| Power1% |
| Depth1% |
| Pass1 |
| Module Type10 W 450 nm |
Step 2
After that, you will get a bat cork coaster.
Step 3 Note
Since the carved pattern is larger than the material, you can place a piece of unused material under the material to protect your base.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
d07584b3950f4b39a66c489f5ecddce9__%3ABat%20Cork%20Coaster.lp2
Open in LDSDownload
4
Halloween
Cork Coaster
Bat
