LaserPecker
Wooden Aircraft Model
How-to
- Machine
- LX1
- Material
- Wood
- Size
- 357 x 228 mm
- Material Information
- 3mm Basswood plank
- Software Used
- LaserPecker Design Space PC
- Production Time
- 30 min
- Engraving Difficulty
Design Files
2023/12/15 18:0549
Introduction
Let's make a wooden aircraft model together.
How-to Tutorial
Step1:
Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
LineBasswood plank
- Engraving Method
- Line
- Material
- Basswood plank
- Power
- 70%
- Depth
- 80%
- Pass
- 1
- Acceleration Level
- 1
- Module Type
- 10 W 450 nm
Step2:
Assemble the wooden pieces and you will end up with a complete wooden aircraft model.
Step3: Note
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Wooden
Model
Aircraft
Comments