Open in LDS
Christmas Tree Decoration
How-to
LaserPecker
2023/12/08 19:11 11
With Christmas coming, it's time to make a Christmas tree decoration using the LX1 engraving machine.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size137 x 224 mm |
| Material Information6mm Basswood plank |
| Production Time15 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the LP2 file. Begin by placing a 6mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
| Engraving MethodLine |
| MaterialBasswood plank |
| Power100% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
Follow the steps on the pictures, and connect the cut wood pieces together, add decorative ball and bow.You will end up with a complete Christmas tree decoration.
Step 3 Note
This file is only applicable to 6mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Christmas Tree Decoration.lp2
Open in LDSDownload
5
Christmas
Christmas Tree
Decoration
