Open in LDS
Christmas Gift Box
How-to
LaserPecker
2023/12/08 18:56 16
With Christmas coming, it's time to make a Christmas gift box using the LX1 engraving machine.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size395 x 409 mm |
| Material Information3mm Basswood plank |
| Software UsedLaserPecker Design Space PC |
| Production Time20 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the LP2 file for the box. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
| Engraving MethodLine |
| MaterialBasswood plank |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
Assemble the wooden pieces according to the steps shown in the accompanying pictures. Following these steps will result in a complete christmas gift box.
Step 3 Note
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
041fad9511514d3885b26a221170b179__%3AChristmas%20gift%20box.lp2
Open in LDSDownload
9
Christmas
Gift Box
