LaserPecker

Woman Earrings

How-to

Machine: LX1
Material: Wood
Size: 70 x 86 mm
Software Used: LaserPecker Design Space PC
Production Time: 20 min
Engraving Difficulty

Design Files

Woman Earrings.lp2

2024/02/27 17:1712

Introduction

With Women's Day approaching, a heartfelt pair of earrings has been crafted as a unique token of affection for this special occasion.

How-to Tutorial

Step1:

Open the file and connect the machine. Begin by placing a 1.5mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting.

If you're using planks or materials of different thicknesses, remember to adjust the parameters accordingly.

组 10-1.jpg

Settings 1

FillWood

Engraving Method: Fill
Material: Wood
Resolution: 2 K
Power: 30%
Depth: 2%
Pass: 1
Acceleration Level: 1
Module Type: 20 W 450 nm

Settings 2

LineWood

Engraving Method: Line
Material: Wood
Power: 70%
Depth: 80%
Pass: 1
Acceleration Level: 1
Module Type: 20 W 450 nm

Step2:

Open another file. Begin by placing the kraft paper on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting.

Additionally, if you use different materials, you will need to adjust the parameters yourself.

组 12-1.jpg

The earring parts were combined with small wooden chips, and then securely fastened onto a leather paper backing. With this, a unique pair of wooden earring gifts was successfully created.

组 3-1.jpg

Settings 1

FillPaper

Engraving Method: Fill
Material: Paper
Resolution: 2 K
Power: 50%
Depth: 2%
Pass: 1
Acceleration Level: 1
Module Type: 20 W 450 nm

Settings 2

LinePaper

Engraving Method: Line
Material: Paper
Power: 100%
Depth: 10%
Pass: 1
Acceleration Level: 1
Module Type: 20 W 450 nm

Good Life

Woman

Wooden