LaserPecker
Colorful Jigsaw Woodpecker
How-to
- Machine
- LX1
- Material
- Wood
- Size
- 332 x 230 mm
- Material Information
- 1.5mm Basswood Plank
- Software Used
- LaserPecker Design Space PC
- Production Time
- 45 min
- Engraving Difficulty
Design Files
2024/01/31 11:096
Introduction
Make a colorful jigsaw woodpecker to decorate your house.
How-to Tutorial
Step1:
Begin by placing a 1.5mm basswood plank on the cutting pad. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
If you're using planks or materials of different thicknesses, remember to adjust the parameters accordingly.
Settings 1
LineWood
- Engraving Method
- Line
- Material
- Wood
- Power
- 70%
- Depth
- 60%
- Pass
- 1
- Acceleration Level
- 1
- Module Type
- 20 W 450 nm
Step2:
Coat the cut wood pieces with the corresponding colors, and let them dry. Glue the frame and the outline base plate together, and then start to piece together. After the puzzle is completed, attach it to white paper and mount it in a frame.
Decorative Painting
Toy
Comments