Open in LDS
Couple Necklace
How-to
LaserPecker
2024/01/13 11:10 35
Make a special necklace for your lover.
Basic Information
| MachineLP4 |
| MaterialMetal |
| Size31 x 10 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time5 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing blank pendants on the base. Open the file and connect the machine, adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
If you're using different materials, remember to adjust the parameters accordingly.
Settings 1
| Engraving MethodFill |
| MaterialMetal |
| Resolution2 K |
| Power100% |
| Depth40% |
| Pass1 |
| Module Type2 W 1064 nm |
Step 2
After that, you will get special necklaces.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Couple Necklace.lp2
Open in LDSDownload
11
Valentine's Day
