Open in LDS
Wooden Chopping Board
How-to
LaserPecker
2023/12/21 14:14 28
engrave your favorite graphics for your food chopping board!
Basic Information
| MachineLP4 |
| MaterialWood |
| Size129 x 130 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time20 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file and connect the LP4 and the LP4 Slide Extension. Place the board on the Slide Extension. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters.. Next, you can start engraving.
Settings 1
| Engraving MethodFill |
| MaterialBeech |
| Resolution2 K |
| Power25% |
| Depth3% |
| Pass1 |
| Module Type10 W 450 nm |
Step 2
A creative wooden food chopping board is completed.
Step 3 Note
If you're using different materials, remember to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
13
Wooden
Chopping Board
