Open in LDS
Forklift and wooden pallet-shaped coasters
How-to
Ning999
2026/06/07 13:09 0
The drawing is applicable to 3mm wood boards
Basic Information
| MachineLX2 |
| Materialwood |
| Size200 x 300 mm |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 Cutting
Cut and remove all parts from the drawing board
Settings 1
| Engraving MethodCut |
| MaterialWood |
| Power80% |
| Speed12 mm/s |
| Pass1 |
| Module Type40 W 450 nm |
Step 2 assembly
Assemble the tray part and the forklift part separately according to the diagram
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
1
Good Life
wood
