Open in LDS
Hexagonal hollow-out storage box with a lid
How-to
Ning999
2026/06/05 22:04 1
The drawing is applicable to 3mm wood boards
Basic Information
| MachineLX2 |
| Materialwood |
| Size200 x 300 mm |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 cutting
Cut and remove the parts according to the parameters.There are multiple artboards in the file. Be careful not to miss any parts
Settings 1
| Engraving MethodCut |
| Materialwood |
| Power80% |
| Speed12 mm/s |
| Pass1 |
| Module Type40 W 450 nm |
Step 2 assembly
Assemble step by step according to the schematic diagram
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
0
Good Life
My Handmade Daily
wood
