Open in LDS
Mom Pen Holder
How-to
twinjet75
2026/05/13 17:19 7
Pen holder for mother's day. Flowers are downloaded from CraftZone Designs
Basic Information
| MachineLP2 Plus |
| MaterialWood |
| Size95 x 80 mm |
| Material Information5pz basswood 3mm 10cmx10cm |
| Engraving Difficulty |
How-to Tutorial
Step 1 Engrave
Place every wood panel 10cmx10cm under LP2 Plus
First step is engraving, second on is fill and third one is cut. Don't move wood panel
Do a material test before engrave/cut
After cut you can sand to remove smoke and brown part on the wood related to cut. After that assemble with wood glue as shown in the picture.
Flowers are solo external line, so you can paint as you want.
Settings 1
| Engraving MethodLine |
| MaterialWood |
| Power85% |
| Depth50% |
| Pass1 |
| Module Type10 W 450 nm |
| Other ParametersDo a material test before engrave |
Settings 2
| Engraving MethodFill |
| MaterialWood |
| Resolution2 K |
| Power80% |
| Depth40% |
| Pass1 |
| Module Type10 W 450 nm |
| Other ParametersDo a material test before engrave |
Settings 3
| Engraving MethodCut |
| MaterialWood |
| Power90% |
| Depth80% |
| Pass2 |
| Module Type10 W 450 nm |
| Other ParametersDo a material test before cut |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
1
flower
Mother's Day
pen holder
pen
holder
