Laser engraved and laser cut, timber homemade bird table
Inspiration
little_leigh20
2026/04/23 04:56 5
DIY timber bird table, with engraving on both the slate roof (1064nm) and sides (450nm). Using repeated 450nm, I was able to cut a curve in the timber for where the birds stand.
Basic Information
| MachineLP5 |
| MaterialWood |
| Size100 x 100 mm |
| Material Information20mm timber |
| Production Time60 min |
| Engraving Difficulty |
How-to Tutorial
Settings 1
| Engraving MethodFill |
| MaterialWood |
| Resolution2 K |
| Power40% |
| Depth30% |
| Pass2 |
| Module Type20W 450nm |
| Other ParametersRequires 2 passes to ensure depth, and the contrast when the wood was stained. |
How-to Tutorial
Settings 2
| Engraving MethodFill |
| MaterialStone |
| Resolution2 K |
| Power27% |
| Depth23% |
| Pass1 |
| Module Type20W 1064nm |
| Laser Frequency50 |
| Other ParametersSlate coasters, drilled, engraved and fitted. |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
3
My Handmade Daily
DIY Assembly
Cutting
Spring
