Open in LDS
Easter bunny tag with hole and customizable name
Inspiration
twinjet75
2026/04/09 21:15 2
Small, customizable Easter bunny with a name to engrave. Enter the desired name before engraving. The bunny has a hole for hanging or using as a tag.
Basic Information
| MachineLP2 Plus |
| MaterialWood |
| Size55 x 90 mm |
| Material InformationPre-coated yellow 3mm basswood |
| Engraving Difficulty |
How-to Tutorial
Settings 1
| Engraving MethodPicture |
| MaterialWood |
| Resolution2 K |
| Power50% |
| Depth20% |
| Pass1 |
| Module Type10 W 450 nm |
| Other ParametersEngraving - Note: Change parameters according wood that you use |
How-to Tutorial
Settings 2
| Engraving MethodLine |
| MaterialWood |
| Power90% |
| Depth80% |
| Pass2 |
| Module Type10 W 450 nm |
| Other ParametersCut - Note: Change parameters according wood that you use |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Bunny-YourName.lp2
Open in LDSDownload
0
easter
bunny
custom
