Open in LDS
Wave Machine Toy
How-to
Ning999
2026/03/28 23:36 4
The blueprint is designed for boards with a thickness of 3mm. Please use boards of sufficient thickness, as using materials with insufficient thickness will not achieve good results
Basic Information
| MachineLX2 |
| Materialwood |
| Size300 x 200 mm |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 cut
Cut and remove all parts from the drawing board
Settings 1
| Engraving MethodCut |
| Power80% |
| Speed12 mm/s |
| Pass1 |
| Module Type40 W 450 nm |
Step 2
Assemble according to the disassembly diagram, and apply lubrication to the elliptical cross-section using wax or WD-40
Step 3
Assemble according to the disassembly diagram, and apply lubrication to the elliptical cross-section using wax or WD-40
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
2
toy
