Open in LDS
đ° Easter Bunny Egg Laser Engraving | 3D Illusion on White Laminated MDF | LX2 40W
How-to
Mark_Beshay
2026/03/26 19:52 6
This Easter bunny egg design is engraved on white laminated MDF using the LaserPecker LX2 40W diode laser, creating a beautiful 3D illusion bas-relief effect.
Basic Information
| MachineLX2 |
| MaterialWood |
| Size123 x 150 mm |
| Production Time25 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 Engrave then cut
Engrave then cut
Settings 1
| Engraving MethodPicture |
| MaterialWood |
| Engraving Density100 |
| Power40% |
| Speed130 mm/s |
| Pass1 |
| Module Type40 W 450 nm |
Settings 2
| Engraving MethodCut |
| MaterialWood |
| Power95% |
| Speed10 mm/s |
| Pass1 |
| Module Type40 W 450 nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Easter Egg.lp2
Open in LDSDownload
2
Easter
Bunny
Egg
