Open in LDS
Wolf Portrait Laser Engraving | White Laminated MDF | LaserPecker LX2 40W
How-to
Mark_Beshay
2026/03/14 04:23 24
This wolf portrait engraving is created on white laminated MDF using the LaserPecker LX2 40W diode laser. The engraved lines remove the white surface layer, revealing the darker base material underneath and creating strong contrast.
Basic Information
| MachineLX2 |
| MaterialWood |
| Size150 x 150 mm |
| Material InformationThis wolf portrait engraving is created on white laminated MDF using the LaserPecker LX2 40W diode laser. The engraved lines remove the white surface layer, revealing the darker base material underneath and creating strong contrast. |
| Production Time25 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 Engrave and cut
Engrave then cut
Settings 1
| Engraving MethodPicture |
| MaterialWood |
| Engraving Density100 |
| Power40% |
| Speed120 mm/s |
| Pass1 |
| Module Type40 W 450 nm |
Settings 2
| Engraving MethodCut |
| MaterialWood |
| Power90% |
| Speed10 mm/s |
| Pass1 |
| Module Type40 W 450 nm |
6
animal
wolf
