Open in LDS
Laser Cut St. Patrick's Day Leprechaun with Stand
How-to
jvallesebower
2026/03/08 00:50 5
I created a leprechaun holding a beer mug cheering Good Luck to all. To his side he has a pot of gold. What better way to celebrate St. Patty's day then with this cute little Leprechaun!
Basic Information
| MachineLP5 |
| MaterialWood |
| Size250 x 250 mm |
| Material Information3mm Basswood |
| Production Time90 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 Download File/ Add extension
Download file. Adapt to your machine. On the LP5 it is larger than the base, so I had to add the slide extension.
Settings 1
| Engraving MethodCut |
| MaterialWood |
| Power80% |
| Depth80% |
| Pass8 |
| Module Type20W 450nm |
Step 2 Cut all the pieces from 3mm basswood and assemble
1. Cut all layers of the leprechaun.
-Move the pieces to fit your wood piece.
-Choose which pieces you want for the base and cut them.
-If you want to paint your leprechaun you can duplicate the outline layer as a score line and center it on top of the backer before cutting.
2. Paint or stain leprechaun pieces.
3. Glue top cutout to backer piece.
4. Glue base.
5. Put leprechaun in base opening.
6. Enjoy your creation!
Settings 1
| Engraving MethodCut |
| MaterialWood |
| Power80% |
| Depth80% |
| Pass8 |
| Module Type20W 450nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
0
Decorative Painting
Spring
St. Patrick's
Leprechaun
Gold
