Open in LDS
merry-go-round
How-to
Ning999
2026/02/26 22:57 6
A carousel that can rotate through gear linkage，the drawing is applicable to wood boards with a thickness of 3mm
Basic Information
| MachineLX2 |
| Materialwood |
| Size300 x 200 mm |
| Engraving Difficulty |
How-to Tutorial
Step 1 cutting
There are eight drawing boards in the file. Cut all the parts and assemble them
Settings 1
| Engraving MethodCut |
| Power80% |
| Speed12 mm/s |
| Pass1 |
| Module Type40 W 450 nm |
Step 2 assembly
Assemble according to the diagram. I have uploaded the STL format modeling file. The model file is more intuitive than the diagram shown in the picture. You can download it yourself. The file can be opened using the built-in drawing software in Windows or most browsers. In addition, some lubrication may be needed at the gears to ensure smooth rotation. You can spray some WD-40 into the gaps after assembly or apply wax to the gears before starting assembly. This drawing has a high assembly difficulty. I hope to see your finished product.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
3
gear
wood
merry-go-round
