Open in LDS
Double heart lollipop holder
How-to
twinjet75
2026/02/13 17:55 1
Double heart-shaped lollipop with a personalized phrase. The design features the words "Lolly-ve you!", a combination of "Lollipop" and "Love."
For this project, I used pre-colored 3mm wood (so any surface burns can be easily cleaned even without air-assist). The maximum diameter of the lollipop hole is 3cm. Use two strings to hold the lollipops in place.
Valentine's Day
#Valentine's Day
Basic Information
| MachineLP2 Plus |
| MaterialWood |
| Size98 x 96 mm |
| Material InformationPre-Colored 3mm wood |
| Engraving Difficulty |
How-to Tutorial
Step 1 Text customization / Engraving
Select Text on "Normal Layer" box and customize phrase on double lollipop heart before to engrave/cut
Change engraving parameter based on wood/dark or light color that you want
Settings 1
| Engraving MethodFill |
| MaterialWood |
| Resolution2 K |
| Power50% |
| Depth50% |
| Pass2 |
| Module Type10 W 450 nm |
| Other ParametersPre-colored 3mm wood |
Step 2 Heart cut
I used pre-colored wood so that I could also clean the black from the cutting process with baby wipes, as I don't have air-assist.
Used wood is soft and two passes are enough, Change passes according to wood that is used.
Settings 1
| Engraving MethodLine |
| MaterialWood |
| Power90% |
| Depth80% |
| Pass2 |
| Module Type10 W 450 nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
0
Valentine's Day
heart
valentine
lollipop
wood
