Open in LDS
Suspended in a kiss - Valentine
How-to
twinjet75
2026/02/13 17:40 19
Silhouette of lovers suspended in a kiss.
Valentine's Day
#Valentine's Day
Basic Information
| MachineLP2 Plus |
| MaterialWood |
| Size95 x 90 mm |
| Material InformationPre-colored 3mm wood |
| Engraving Difficulty |
How-to Tutorial
Step 1
The lower section of silhouette can be customized with names.
For the cutting, I used pre-colored wood so that I could also clean the black from the cutting process with baby wipes, as I don't have air-assist.
The silhouette is connected to the outer heart with strings so they can swing like a swing.
Use wood glue to attach the heart to the base.
Used wood is soft and two passes are enough, Change passes according to wood that is used.
Project is divided into two files, the first one is composed by heart and silhouette, the second one is the base.
Basehole for assembly is design with my wood tolerance. Please change according wood that is used.
Measure 95mmx90mm
Settings 1
| Engraving MethodLine |
| MaterialWood |
| Power90% |
| Depth80% |
| Pass2 |
| Module Type10 W 450 nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
3
Valentine's Day
heart
silhouette
