Depth Dragon on LP1 Pro
How-to
DaVinci10
2026/01/29 23:43 13
LP1 Pro "Depth Dragon" from @brucejess87
Basic Information
| MachineLP1 Pro |
| MaterialWood |
| Size100 x 100 mm |
| Material InformationTwo test pieces shown were received in the Wood Materials Package |
| Production Time360 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 Fill with BW selected after import and slider at 70
Finished with Cleanup of engraving with toothbrush and mouthwash as suggested by @brucejess87
When I saw this project, I didn't know if the LP1 Pro could do deep engraving. I was pleasantly surprised.
I also put some pics of the other piece I ran, (ply) from the wood materials kit; to see the results on it as well.
Have a great day everyone!
DaVinci10
Settings 1
| Engraving MethodFill |
| MaterialWood |
| Resolution2 K |
| Power100% |
| Depth60% |
| Pass3 |
| Module Type0.5W 405nm |
| Other Parametersimported image from "depth dragon" and selected BW (70) burned 3 passes for deep engraving |
Settings 2
| Engraving MethodPicture |
| MaterialWood |
| Resolution2 K |
| Power100% |
| Depth30% |
| Pass2 |
| Module Type0.5W 405nm |
| Other Parametersimported depthdragon.svg, selected Dither, and used default. burned two passes to finish depth passes |
Settings 3
| Engraving MethodFill |
| MaterialWood |
| Resolution2 K |
| Power100% |
| Depth33% |
| Pass2 |
| Module Type0.5W 405nm |
| Other Parametersimported file, selected pencil, left default slider. burned two passes for fine detail. |
1
Happy New Year
