Open in LDS
Lucky Pendent
How-to
francesco.q84
2026/01/12 20:15 5
Imege engraving of an italian Lucky Horn on Stainless Steel Pendent Heart shaped
Basic Information
| MachineLP2 Plus |
| MaterialMetal |
| Size30 x 30 mm |
| Material InformationStainless Steel 1mm thickness |
| Production Time1 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 Prepare and Engrave
Before starting, I recommend painting the stainless steel pendant with a covering paint, preferably black (in my case, I used red with good results) for optimal results.
Import the image.
Set the image to dithering mode, then invert the image and slightly adjust the contrast and brightness (in my case, contrast: 0.3; brightness: 0.1).
Set the engraving parameters and proceed.
Once finished, remove the paint.
Settings 1
| Engraving MethodPicture |
| MaterialMetal |
| Resolution2 K |
| Power100% |
| Depth100% |
| Pass1 |
| Module Type10 W 450 nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
0
Happy New Year
lucky
metal engraving
