Christmas Star Cardboarad
Basic Information
| MachineLP2 Plus |
| MaterialCardboard |
| Size80 x 80 mm |
| Material InformationStandard recycled cardboard from cereal box. Thickness: 0,40mm |
| Engraving Difficulty |
How-to Tutorial
Step 1 First Star
First, position the images as shown in the attached image.
The cut line and fold line must be centered.
Then, insert the artwork in the center.
Now, hide the cut line and assign the settings to the line and the image as follows.
Place the cardboard on the laserpecker base and add tape to secure it to the base.
Preview the laserpecker design, then laser it.
After engraving, hide the fold line and the artwork, then show the cut line and assign the cutting parameters.
Preview the laserpecker, then laser it.
Fold the cardboard along the fold lines.
Settings 1
| Engraving MethodPicture |
| MaterialCardboard |
| Resolution1 K |
| Power70% |
| Depth50% |
| Pass1 |
| Module Type10 W 450 nm |
| Other ParametersAssign this setting to the picture |
Settings 2
| Engraving MethodLine |
| MaterialCardboard |
| Power70% |
| Depth50% |
| Pass1 |
| Module Type10 W 450 nm |
| Other ParametersAssign this parameter to fold lines |
Settings 3
| Engraving MethodLine |
| MaterialCardboard |
| Power100% |
| Depth80% |
| Pass1 |
| Module Type10 W 450 nm |
| Other ParametersAssign this parmeter to cut cardboard |
Step 2 Second Star
First, position the images as shown in the attached image.
The cut line and fold line must be centered.
Then, insert the artwork in the center.
Now, hide the cut line and assign the settings to the line and the image as follows.
Place the cardboard on the laserpecker base and add tape to secure it to the base.
Preview the laserpecker design, then laser it.
After engraving, hide the fold line and the artwork, then show the cut line and assign the cutting parameters.
Preview the laserpecker, then laser it.
Fold the cardboard along the fold lines.
Settings 1
| Engraving MethodPicture |
| MaterialCardboard |
| Resolution1 K |
| Power70% |
| Depth50% |
| Pass1 |
| Module Type10 W 450 nm |
| Other ParametersAssign this setting to the picture |
Settings 2
| Engraving MethodLine |
| MaterialCardboard |
| Power70% |
| Depth50% |
| Pass1 |
| Module Type10 W 450 nm |
| Other ParametersAssign this setting to the fold lines |
Settings 3
| Engraving MethodLine |
| MaterialCardboard |
| Power100% |
| Depth80% |
| Pass1 |
| Module Type10 W 450 nm |
| Other ParametersAssign this setting to cut lines |
Step 3 Glue the Element
Add some glue or double-sided tape on the first and second star like the image, then assemble the two star.
Add a string to the star and position to the Christmas Tree.
Enjoy!
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
