Open in LDS
Christmas Tree with Reindeer - Deep 3D Carving on 25mm Pine Wood
How-to
Mark_Beshay
2025/12/15 01:49 15
Just wrapped up this deep-carved Christmas tree with a reindeer, fully engraved and cut from a 25mm solid pine wood block using the LaserPecker LX2 40W diode module.
The LX2 handled the thickness beautifully — capturing every detail from the Merry Christmas text to the tiny snowflakes and the reindeer silhouette.
Basic Information
| MachineLX2 |
| MaterialWood |
| Size150 x 177 mm |
| Material Information25 mm Pine wood |
| Production Time60 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 Engraving & Cutting
Engrave then Cut
Settings 1
| Engraving MethodFill |
| MaterialWood |
| Engraving Density200 |
| Power80% |
| Speed100 mm/s |
| Pass1 |
| Module Type40 W 450 nm |
Settings 2
| Engraving MethodCut |
| MaterialWood |
| Power100% |
| Speed3 mm/s |
| Pass1 |
| Module Type40 W 450 nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Reindeer Tree.lp2
Open in LDSDownload
4
Christmas
DIY Assembly
Cutting
