Laser Engraved Pumpkin
Inspiration
little_leigh20
2025/11/03 19:47 5
Engraved pumpkin ideas to make complex designs easily. Either using line engraving to then subsequently carve out, or using additional fill settings to remove the material for internally LED lit pumpkins.
Basic Information
| MachineLP5 |
| MaterialFood |
| Size150 x 150 mm |
| Material InformationPumpkin |
| Production Time20 min |
| Engraving Difficulty |
How-to Tutorial
Settings 1
| Engraving MethodLine |
| MaterialFood |
| Power40% |
| Depth40% |
| Pass2 |
| Module Type20W 450nm |
| Other ParametersThis line setting was used to provide a deep enough outline prior to carving. |
How-to Tutorial
Settings 2
| Engraving MethodFill |
| MaterialFood |
| Resolution2 K |
| Power40% |
| Depth40% |
| Pass2 |
| Module Type20W 450nm |
| Other ParametersThis fill setting was used to remove the pumpkin skin, to enable light to pass through once lit from the inside. |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
1
Halloween
Pumpkin
