Open in LDS
Deep-Engraved Mug
How-to
LaserPecker
2025/08/30 17:15 22
Let's take a look at how personalized and visually appealing custom deep-engraved mugs are crafted!
Basic Information
| MachineLP5 |
| MaterialCeramics |
| Size60 x 74 mm |
| Production Time3 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file, connect the machine and the rotary extension, measure the diameter or circumference of the cup, and fill in the location shown in the image. Fix the mug on the rotation, then adjust the focus, verify the size, preview the position, and determine the engraving parameters. Next, you can start engraving.
Settings 1
| Engraving MethodFill |
| MaterialCeramics |
| Resolution4 K |
| Power100% |
| Depth32% |
| Pass3 |
| Module Type20W 1064nm |
| Laser Frequency26 |
Step 2
After the engraving is completed, clean the dust from the surface. Then, brush a layer of paint onto the surface to allow it to fill the engraved grooves. Finally, wipe away any excess paint. And voilà—the finished product is ready!
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
9
Good Life
