Open in LDS
School Card
How-to
LaserPecker
2025/08/22 16:39 8
Unveiled! How a Black Acrylic Sheet Transforms into an Ultra-Cool Campus Card!
Basic Information
| MachineLP5 |
| MaterialOpacity Acrylic |
| Size57 x 88 mm |
| Material Information3mm Black Acrylic |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
First, engrave the image on the front side and then cut it out.
Open the file and connect the machine. Begin by placing a piece of 3mm black Acrylic on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting.
Settings 1
| Engraving MethodPicture |
| MaterialOpacity Acrylic |
| Resolution4 K |
| Power20% |
| Depth1% |
| Pass1 |
| Module Type20W 1064nm |
| Laser Frequency26 |
Settings 2
| Engraving MethodLine |
| MaterialOpacity Acrylic |
| Power100% |
| Depth90% |
| Pass4 |
| Module Type20W 450nm |
Step 2
After completing the previous step, flip the cut acrylic piece over and engrave the pattern on the back side.
Step 3
Finally, attach the lanyard, and your campus card is complete!
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
School Card.lp2
Open in LDSDownload
3
School
Student
Academy
