Open in LDS
Engraved & Cut Leather Demon Oni Patch
How-to
Rovghall
2025/06/13 06:13 20
Used my LaserPecker LP5 to engrave and cut this fierce Oni demon design on faux leather. The deep contrast and precision in the engraving really bring the expression to life, and the cutout makes it perfect for decorative patches or keychains. Great for customizing bags, jackets, or even just as a cool collectible.
Basic Information
| MachineLP5 |
| MaterialLeather |
| Size39 x 46 mm |
| Production Time5 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
How to Make It:
- Open the LaserPecker software.
- Upload the design and resize it to your preference.
- Apply the settings for "Picture" as shown in the example image.
Settings 1
| Engraving MethodPicture |
| MaterialLeather |
| Resolution2 K |
| Power10% |
| Depth22% |
| Pass1 |
| Module Type20W 450nm |
Step 2 Cutting Steps
Cutting Step:
- Go to the top menu and click on “Outline”. Set the margin between the design and the cut — for this piece, I used a 2mm offset (image nr 1).
- In the “Line” section/layer, apply the cutting settings as shown in the reference image (nr 2).
- Ready to engrave and cut!
Settings 1
| Engraving MethodLine |
| MaterialLeather |
| Power100% |
| Depth95% |
| Pass1 |
| Module Type20W 1064nm |
| Laser Frequency26 |
Step 3 Engraving on the back of the leather
This is how it will look if you engrave on the back side of the leather.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
0
demon oni
leather
keychain
patches
