2.5D wood engraving
How-to
brucejess87
2025/06/11 13:03 79
upload into design space. increase contrast to max amount set 450nm 2k 40 power 40 depth 5 passes or until desired depth once done return contrast to normal and set power depth to 10 for 1 pass this adds the realistic shadows. then apply cutline.
Basic Information
| MachineLP5 |
| MaterialWood |
| Size100 x 105 mm |
| Material Information6mm basswood |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 uplaod. increase contrast to max 450nm 2k 40/40 5 passes. return to normal contrast run 1 pass 40/10
uplaod, set contrast to max. run 5 passes 40/40 2k then return to normal contrast run 1 pass 2k 40/10
Settings 1
| Engraving MethodPicture |
| MaterialWood |
| Resolution2 K |
| Power40% |
| Depth10% |
| Pass1 |
| Module Type20W 450nm |
Settings 2
| Engraving MethodLine |
| MaterialWood |
| Power94% |
| Depth75% |
| Pass30 |
| Module Type20W 450nm |
8
Good Life
My Handmade Daily
Sharing Good Finds
Cutting
