Open in LDS
Customized Permanent Marker – Minimal Gold Touch
How-to
Rovghall
2025/06/05 07:34 8
Engraved this white permanent marker using the LaserPecker LP5, adding a simple design with gold clean lines: a feather, arrows, and a subtle geometric shape.
Perfect for gifting or just to personalize your everyday tools.
Basic Information
| MachineLP5 |
| MaterialPlastic |
| Size14 x 3 mm |
| Production Time2 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
How to Do It:
- Open the LaserPecker software and drag the 3 minimalist designs into the workspace.
- Arrange the designs in the order you prefer, in this case, I aligned them vertically to fit the marker.
- Select all three designs.
- Click on “Group” in the top menu bar (as shown in the third image).
- Enter the engraving values as shown in the example image.
Settings 1
| Engraving MethodPicture |
| MaterialPlastic |
| Resolution4 K |
| Power20% |
| Depth5% |
| Pass3 |
| Module Type20W 1064nm |
| Laser Frequency26 |
Step 2 Place and align the permanent marker properly on the base of your LaserPecker
How to do it:
1. Place the permanent marker ou pen on the base of your LaserPecker machine.
2. In the software, click Preview to project the blue outline onto the marker.
3. Adjust the permanent marker position until the blue preview lines match the area
4. Once it's aligned correctly, you're ready to engrave!
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
0
marker permanent
minimalist
