Open in LDS
Easily Distracted by Books – Laser Engraved Coin
How-to
Rovghall
2025/06/04 07:43 12
The design “Easily Distracted by Books” was engraved onto a metal coin using the LaserPecker LP5, with great precision and clarity.
A perfect little keepsake for readers, writers, or anyone who can’t resist a good story. Use it as a collectible, a bookmark weight, or a gift for your favorite bookworm!
Basic Information
| MachineLP5 |
| MaterialMetal |
| Size29 x 34 mm |
| Production Time5 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
How to Do It:
The coins I'm using have a 40mm diameter, but as you can see in the settings, I scaled the design down to 29mm x 34mm.
This was intentional - I wanted the engraving to stay within the inner
surface of the coin and not overlap the raised outer edge.
- Open the LaserPecker software and drag the coin design file into the workspace.
- Resize the image to 29mm x 34mm to ensure it fits neatly inside the coin's inner area.
- Apply the engraving settings as shown in the reference image.
- Adjust the coin’s position until the blue preview lines match the inner circle of the coin — this ensures the engraving will stay within the
inner area only. - Ready to engrave!
Settings 1
| Engraving MethodFill |
| MaterialMetal |
| Resolution2 K |
| Power45% |
| Depth30% |
| Pass5 |
| Module Type20W 1064nm |
| Laser Frequency35 |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
1
brass coin
coin
book lover
