Open in LDS
Personalized Stethoscope
How-to
Rovghall
2025/05/18 03:24 5
Engraved this stethoscope for my wife.
Used the LaserPecker LP5 to personalize it with her name and a little heart.
Perfect gift for healthcare professionals who want something personal and meaningful.
Basic Information
| MachineLP5 |
| MaterialMetal |
| Size15 x 3 mm |
| Material InformationStethoscope Anozied Aluminum |
| Production Time2 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 Add a name!
How to Make It:
- Open the LaserPecker software.
- Go to the “Text” tab and write what you want.
- Set the desired dimensions.
- Apply the settings as shown in the example image.
Settings 1
| Engraving MethodFill |
| MaterialMetal |
| Resolution2 K |
| Power45% |
| Depth45% |
| Pass1 |
| Module Type20W 1064nm |
| Laser Frequency26 |
Step 2 Add an Icon!
How to Make It:
- Go to the “Clipart” and pick an icon available there!
- Set the desired dimensions and put is beside your text.
- Apply the settings as shown in the example image.
Settings 1
| Engraving MethodPicture |
| MaterialMetal |
| Resolution2 K |
| Power45% |
| Depth45% |
| Pass1 |
| Module Type20W 1064nm |
| Laser Frequency26 |
Step 3 Preview
If you're going to engrave a stethoscope, try to keep it leveled on the LP5 base. Run a preview and make sure the focus is correctly set on the area you want to engrave.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
inspiration.lp2
Open in LDSDownload
1
Good Life
Nurse Life
Stethoscope
