Open in LDS
Deep Engraving on Stone
How-to
LaserPecker
2025/05/16 19:32 51
Let's take a closer look at how exquisite Engravings are made on hard stone.
Basic Information
| MachineLP5 |
| MaterialStone |
| Size90 x 60 mm |
| Production Time240 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Since embossing files are often large, it's recommended to use a USB flash drive for 3D Grayscale Embossing. To minimize waiting time, import the .lpb format file onto a USB flash drive beforehand.
Settings 1
| Engraving MethodPicture |
| MaterialStone |
| Resolution4 K |
| Power100% |
| Depth20% |
| Pass254 |
| Module Type20W 1064nm |
| Laser Frequency30 |
Step 2
After the engraving is completed, use a brush to sweep away the dust from the stone.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
9
Good Life
