Open in LDS
Wall Art-Color Engraving
How-to
LaserPecker
2025/05/06 18:40 77
Colorful pattern engraving without using pigments, let's see if it can be achieved!
Basic Information
| MachineLP5 |
| MaterialMetal |
| Size35 x 35 mm |
| Material InformationStainless Steel |
| Production Time6 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Before the official engraving, a Material Array Test is required to determine the colors produced on the material under different parameters. The complete color engraving process and detailed operation instructions can be found on the official LaserPecker YouTube channel.
Step 2
After confirming the parameters corresponding to each color and setting the engraving parameters for each layer, the official engraving can begin.
Note:
- Since the colors are affected by factors such as machine model, focal length, and material, the parameters are for reference only.
- The PC version does not support simultaneous Engraving of multiple layers with different parameters.
Settings 1
| Engraving MethodFill |
| MaterialMetal |
| Resolution8 K |
| Power28% |
| Depth20% |
| Pass1 |
| Module Type20W 1064nm |
| Laser Frequency60 |
Settings 2
| Engraving MethodFill |
| MaterialMetal |
| Resolution4 K |
| Power92% |
| Depth15% |
| Pass1 |
| Module Type20W 1064nm |
| Laser Frequency60 |
Settings 3
| Engraving MethodFill |
| MaterialMetal |
| Resolution8 K |
| Power84% |
| Depth30% |
| Pass1 |
| Module Type20W 1064nm |
| Laser Frequency60 |
Settings 4
| Engraving MethodFill |
| MaterialMetal |
| Resolution8 K |
| Power92% |
| Depth20% |
| Pass1 |
| Module Type20W 1064nm |
| Laser Frequency60 |
Settings 5
| Engraving MethodFill |
| MaterialMetal |
| Resolution8 K |
| Power20% |
| Depth50% |
| Pass1 |
| Module Type20W 1064nm |
| Laser Frequency60 |
Step 3
After the engraving is completed, a colorful pattern is obtained.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
11
Good Life
