Open in LDS
Cutout Dragon Name Sign
Inspiration
cruffler80634
2025/04/10 11:47 22
Dragon cut from quarter inch (5mm) plywood and CA glued to the a small wooden sign using LX1.... Dragon design was created in Canva then I used the outline function in the Design Space Software with an offset of 0 to get the line. I then deleted the dragon image.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size100 x 100 mm |
| Material Information5mm plywood from Home Depot. Sign backing was bought at Hobby Lobby |
| Production Time15 min |
| Engraving Difficulty |
How-to Tutorial
Settings 1
| Engraving MethodCut |
| MaterialWood |
| Power100% |
| Depth50% |
| Pass2 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
dragoncutoutLX1.lp2
Open in LDSDownload
0
Name Sign
Wooden Cutout
wall decor sign
custom name
personalized
sign for teen
child sign
