Open in LDS
Easter Decoration Pendant
How-to
LaserPecker
2025/04/03 11:25 16
Create fun and creative ornaments to add color to this hopeful Easter!
Basic Information
| MachineLP2 |
| MaterialWood |
| Size88 x 94 mm |
| Material Information1.5mm Wooden Plate Plywood |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Connect the machine and open the file. Begin by placing 1.5mm plywood on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting at the same time.
Settings 1
| Engraving MethodFill |
| MaterialWood |
| Resolution2 K |
| Power90% |
| Depth3% |
| Pass1 |
| Module Type5 W 450 nm |
Settings 2
| Engraving MethodLine |
| MaterialWood |
| Power100% |
| Depth80% |
| Pass1 |
| Module Type5 W 450 nm |
Step 2
Color the rabbit's nose and the bowtie, and after they dry, stick them in their respective positions. Finally, use twine to string them together, and the pendant is finished!
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Easter Decoration Pendant.lp2
Open in LDSDownload
1
Good Life
Easter
