Morning Chorus
Basic Information
| MachineLP2 |
| MaterialWood |
| Size100 x 100 mm |
| Material InformationA simple plywood coaster |
| Production Time25 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 Create on Canva, alter on Imag-R, burn on Design Space
The first thing I did was to use Dreamscape on Canva and create a blackbird singing on a branch. I sharpened up the image on there before saving. I then uploaded to Imag-R, set the dimensions to 100x100 mm and put the DPI to 234. The next stage is to press the one touch button. I then selected Wood and Nero algorithm.
After saving on PC I then sent it to my Android. I set up the Laserpecker2, set the power at 93, depth 75 and 1 pass. I would say that you may wish to consider playing around with the depth to perhaps a bit less but nevertheless I was quite pleased with the outcome. I also like the fact that plywood is very cheap and a good material to try upon before perhaps trying on slate. I also quite often flip the coaster to have a double sided one. I didn't use any treatment and just burned onto the wood.
Settings 1
| Engraving MethodFill |
| MaterialWood |
| Resolution1 K |
| Power93% |
| Depth75% |
| Pass1 |
| Module Type5 W 450 nm |
| Other ParametersA simple plywood coaster available from Amazon |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
