Open in LDS
New Year Glass Decoration
How-to
LaserPecker
2025/01/04 19:31 19
Metal cutting made easy with the LP5! Craft beautiful metal decorations for your New Year party!
Basic Information
| MachineLP5 |
| MaterialMetal/Wood |
| Size55 x 90 mm |
| Material Information0.3mm Brass & 2mm Walnut Wood |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Connect the machine and open the file. Begin by placing 2mm brass on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting at the same time.
Settings 1
| Engraving MethodFill |
| MaterialMetal |
| Resolution4 K |
| Power90% |
| Depth6% |
| Pass1 |
| Module Type20W 1064nm |
| Laser Frequency26 |
Settings 2
| Engraving MethodCut |
| MaterialMetal |
| Power95% |
| Depth95% |
| Pass4 |
| Module Type20W 1064nm |
| Laser Frequency26 |
Step 2
Begin by placing 2mm walnut wood on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Apply glue on the wooden piece and attach it to the brass.
Settings 1
| Engraving MethodCut |
| MaterialWood |
| Power70% |
| Depth80% |
| Pass5 |
| Module Type20W 450nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
5
Happy New Year
