Foxy coaster
Inspiration
Kingsraconteur
2024/12/28 18:25 12
An image of a fox in the wild
Basic Information
| MachineLP2 |
| MaterialWood |
| Size100 x 100 mm |
| Material InformationA simple budget coaster from Amazon |
| Production Time40 min |
| Engraving Difficulty |
How-to Tutorial
Settings 1
| Engraving MethodLine |
| MaterialWood |
| Power93% |
| Depth63% |
| Pass1 |
| Module Type5 W 450 nm |
| Other ParametersIt's important to note that when I first run this on these settings the results were a bit washed out. I then took a chance to do another pass with 75d and discovered it gave the results above. As always, we can never guarantee the perfect results but those were my settings. If you invert it, it should come out on slate quite nicely. My go to settings for slate are 93p, 43d, 1 pass. The image was used on the dither setting. |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Heed the yapping fox out on the wildest of hunts to feed kith and kin.-skeldon-wood-234.jpg
2
coaster
wood
nature
fox
animal
