Open in LDS
Pet Collar Charm
How-to
LaserPecker
2024/12/17 19:14 31
Don't forget to make personalized name tags for your dogs and spread the Christmas cheer throughout your home.
Basic Information
| MachineLP5 |
| MaterialOpacity Acrylic |
| Size56 x 43 mm |
| Material Information3mm Acrylic |
| Production Time20 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Connect the machine and open the file. Begin by placing 3mm black acrylic on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting at the same time.
The file also includes blank name tags without any names, so everyone can add their pet's name. Go ahead and give it a try!
Settings 1
| Engraving MethodFill |
| MaterialOpacity Acrylic |
| Resolution2 K |
| Power100% |
| Depth2% |
| Pass1 |
| Module Type20W 1064nm |
| Laser Frequency26 |
Settings 2
| Engraving MethodLine |
| MaterialOpacity Acrylic |
| Power100% |
| Depth95% |
| Pass2 |
| Module Type20W 450nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Pet Collar Charm.lp2
Open in LDSDownload
5
Christmas
Pet
