Open in LDS
Christmas Dog House
How-to
LaserPecker
2024/12/07 12:11 17
Have you picked the perfect gift for your furry friend? With the LaserPecker LX1-Max, you can DIY a cozy little house for them!
Basic Information
| MachineLX1 |
| MaterialWood |
| Size1634 x 947 mm |
| Material Information3mm Basswood Plank |
| Production Time120 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Connect the machine and open the first file. Begin by placing 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Cut the parts out of the file one by one.
Settings 1
| Engraving MethodLine |
| MaterialWood |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
Based on the photos and the floor plan, paint the roof sections and decorative pieces with white paint. Once dry, they can be assembled, and the pet house will be ready.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Christmas Dog House-all.lp2
Open in LDSDownload
Christmas Dog House-all - 1.lp2
Open in LDSDownload
Christmas Dog House-all - 2.lp2
Open in LDSDownload
Christmas Dog House-all - 3.lp2
Open in LDSDownload
Christmas Dog House-all - 4.lp2
Open in LDSDownload
Christmas Dog House-all - 5.lp2
Open in LDSDownload
Christmas Dog House-all - 6.lp2
Open in LDSDownload
2
Christmas
Dog
