Open in LDS
Blank Bone ID Tag
How-to
Lgawthorpe
2024/03/28 22:06 28
For cutting and engraving on LP2, LP3, LP4 and LX1
Basic Information
| MachineLP2 |
| MaterialPlastic |
| Size98 x 98 mm |
| Material InformationPlease use cast acrylic sheets not extruded. |
| Production Time5 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 Place 2mm acrylic sheet under your laser on cutting bed
Download the file for the blank tag, upload to LP Design space, use only cast resin sheets of any colour of your choice, I made the design in inches do setting 1 for cut first. (Don’t have cut use line setting)
Engrave your text or design into the bone blank, single or double sided.
Purchase some keyring loops of eBay or Amazon or local craft store. Here’s what I use
Use the tags for your pets, luggage or cage if you’ve multiple pets and get mixed up.
Drill one 5mm hole in top of your blank ID tags for your keychain to go through.
Settings 1
| Engraving MethodCut |
| MaterialPlastic |
| Power100% |
| Depth100% |
| Pass4 |
| Module Type5 W 450 nm |
| Other ParametersUse cut setting if you don’t have line setting on your laser |
Settings 2
| Engraving MethodFill |
| MaterialPlastic |
| Resolution2 K |
| Power60% |
| Depth20% |
| Pass1 |
| Module Type5 W 450 nm |
| Other ParametersEnter your details example > I’m lost, Call: 01234 56789 |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Blank Bone ID Tag.lp2
Open in LDSDownload
13
Cutting
Handmade
Acrylic
Tags
Blank
Plastic
