Open in LDS
Cortical Clock
How-to
LaserPecker
2024/01/19 16:40 6
Make a different leather clock.
Basic Information
| MachineLP4 |
| MaterialLeather |
| Size136 x 133 mm |
| Production Time10 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file and connect the LP4 and the LP4 Slide Extension. Place the leather on the Slide Extension. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters.. Next, you can start engraving.
If you're using different materials, remember to adjust the parameters accordingly.
After assembling the clock accessories and leather, a leather clock is ready.
Settings 1
| Engraving MethodFill |
| MaterialLeather |
| Resolution2 K |
| Power25% |
| Depth50% |
| Pass1 |
| Module Type2 W 1064 nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Leather Clock.lp2
Open in LDSDownload
3
Good Life
Time
