Open in LDS
Birthday Gift Box
How-to
LaserPecker
2024/01/13 11:04 9
If your friend's birthday is coming up, make a gift box with the engraving machine and fill it with a necklace or other gifts to give her.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size217 x 196 mm |
| Production Time20 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file and connect the machine. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Settings 1
| Engraving MethodFill |
| MaterialWood |
| Resolution2 K |
| Power30% |
| Depth3% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Settings 2
| Engraving MethodLine |
| MaterialWood |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Birthday Gift Box.lp2
Open in LDSDownload
5
Birthday Gift
Box
